When something stops working in your home or building, the first thing you need is a clear answer about what is wrong and what it will take to fix it. Dead outlets, a panel that keeps tripping, lights that flicker on one circuit, wiring from a previous decade that was never meant to carry the loads modern homes demand - these are the calls we handle in Concord. We handle the full range of residential and commercial electrical work here, from a single repair to a whole-home rewire, and the scope is worked out before anyone is scheduled.
Concord is a city with a wide mix of housing and commercial property, and the electrical work reflects that. Older homes in established neighborhoods often carry wiring that predates modern load requirements. Newer builds and additions bring their own set of circuit demands. Businesses and landlords managing multiple units need work done on a schedule that does not shut down the whole operation. Whatever the situation, we show up ready to wire.
Call (980) 479-9789 to get a quote.
Most electrical jobs do not require shutting the whole building down. Replacing an outlet, adding a circuit, or swapping a fixture means isolating the one breaker that feeds that part of the house. The rest of the home stays live. That matters when someone is working from home, when a business is trading, or when a tenant cannot be without power for hours at a stretch.
Jobs that do require a full shutdown are usually panel replacements and service upgrades. When the main breaker comes out, everything goes off. That is a planned event, and you know about it before the visit is booked. We confirm the shutdown window on the call before the visit is booked, and we work through it as efficiently as the job allows so the outage is as short as it can be.
For commercial properties and occupied rentals, the planning conversation happens before anyone arrives. If a circuit feeds critical equipment, we identify that upfront and schedule around it. We keep you informed from diagnosis to final test, so there are no decisions made on the day that should have been made the week before.
The price depends on what the job actually involves, and that is not something this page can answer with a number. What moves a quote is the nature of the fault, what has to be opened up to reach it, and whether the existing panel has the capacity to carry what is being added. A dedicated circuit for a new appliance is a different job from a whole-home rewire. A GFCI outlet replacement is a different scope from tracing an intermittent fault through a 1960s branch circuit.
When you call, we go through the job on the phone. You describe what is happening, we ask the questions that shape the scope, and you get the price before anything is scheduled. The price is confirmed before the visit is booked, and it covers what the job involves. Ask what it covers and you get a straight answer.
What would change a quote after the call is finding something that was not visible from the description. If we open a wall and find knob-and-tube wiring where modern wiring was expected, that changes the scope. That conversation happens before the work continues, not after it is done. You get a straight answer about the work before it is scheduled.
Previous electrical work ranges from perfectly solid to genuinely dangerous, and most of it falls somewhere in between. A circuit added without a ground conductor, a junction box buried in a wall, a breaker oversized for the wire it feeds - these are correctable. We identify what is there, explain what it means, and give you the options. Code-compliant wiring is the standard everything is brought to, and that is the baseline for any repair or addition we make to an existing circuit.
Grounding and bonding issues are common in older Concord homes where the original wiring was two-wire and no ground was ever run. Adding GFCI protection at the outlet location is one code-accepted approach for ungrounded circuits. Running a ground conductor back to the panel is another where the circuit allows it. The right answer depends on the specific circuit and what the location requires.
Some work cannot be corrected in place. Knob-and-tube wiring that has been modified, overloaded, or buried under insulation has reached the point where repair is not the answer. Aluminum branch-circuit wiring connected with hardware that was never rated for it is in the same category. When we find work that cannot be made safe through targeted repair, we say so and explain why, without making a production of it. The goal is a clear account of what is there and what the path forward looks like.
We are open every day from 6:30 AM to 10:30 PM. When you call during those hours, you reach someone who knows the trade and can scope the job on the phone. The visit is booked once the scope and the price are confirmed. That is the whole process.
For problems that will not keep, the same number reaches us. We take short-notice work when the schedule allows, and the call is the place to find out what is available. We do not promise arrival windows, but we confirm what is realistic when you book.
Tenants and businesses that have to stay operational get the same planning conversation as anyone else. We identify which circuits need to be isolated, how long the work is expected to take, and what access is needed before the visit is scheduled. One call is enough to get the visit booked.
Recessed lighting and LED fixture upgrades are among the most common lighting requests we handle. A room that was wired for a single ceiling fixture in the center often benefits from a multi-point recessed layout, and the wiring involved is a straightforward addition when the circuit has capacity. Under-cabinet lighting in a kitchen, pendant fixtures over an island, and dimmer switches that work correctly with LED loads are all jobs that get asked for regularly.
Ceiling fan installation and replacement comes up constantly. The work involves confirming the ceiling box is rated for fan weight and movement before the fixture goes up. A box that was installed for a light fixture is not always adequate for a fan, and checking that first prevents a problem later.
Exterior lighting covers security lighting, motion-sensor fixtures, landscape lighting circuits, and weatherproof outlets for outdoor use. A well-placed security light at an entry or driveway does more than a poorly placed one, and the wiring for a landscape lighting circuit is easiest to run when other outdoor work is already scheduled. We handle the circuit and the fixture, not just one or the other.
An inspection is the right call before buying a property, when wiring is old enough that nobody is sure what is behind the walls, or when a rental unit needs to be confirmed as code-compliant before a new tenancy begins. The visit covers the panel, the branch circuits, the outlets, grounding and bonding, and GFCI and AFCI coverage. The report documents what is there and what needs attention, without inflating the scope.
GFCI protection is required at kitchens, bathrooms, garages, and any location near water. AFCI protection is required on bedroom circuits and increasingly on living-area circuits under current code. Homes that have not been updated to include both types of protection are missing a layer that current code requires. We install arc-fault and ground-fault breakers and devices at the locations that need them, and we confirm the circuit is wired correctly to support them.
A panel that was sized for a lighter load than the home now carries is a common situation in a city where housing stock spans several decades. Load calculations tell us whether the existing service can carry what is being asked of it. If it cannot, a panel upgrade to 200-amp service is the answer. Breaker replacement addresses individual breakers that are failing, running hot, or no longer tripping reliably. Both jobs start with a look at what the panel is currently carrying.
A detached garage or workshop that needs more than a single circuit gets a subpanel fed from the main panel. The subpanel carries its own breakers and gives the space the capacity to run power tools, lighting, and dedicated appliance circuits without running individual circuits back to the house for each one. We size the subpanel to the load the space requires and run the feeder from the main panel accordingly.
Doorbell wiring, data outlets, and low-voltage rough-in for structured wiring are part of what we handle on new construction and renovation projects. These are often easiest to run during a renovation when walls are open, and combining them with other electrical work on the same visit keeps the disruption to one appointment rather than several.
We serve Concord and the surrounding communities throughout Cabarrus County, including Harrisburg, Kannapolis, Enochville, Landis, and Mount Pleasant. If you are not sure whether your address is covered, a quick call will confirm it. The whole area is part of the same service territory, and the same process applies wherever you are. There is a fuller write-up on our services page.
We let you know as soon as it becomes clear that the job will take longer than expected. If the shutdown is causing a problem, we discuss what can be completed within the window and what needs to be finished at a follow-up visit. We do not leave circuits open or work incomplete without a clear plan for the next step.
Yes. Landlords and property managers use us to bring units up to code before a new tenancy, to add circuits for tenant build-outs, and to address faults in occupied buildings without shutting down the whole property. Commercial work covers panel upgrades, dedicated circuits for equipment, and code-compliant wiring for renovations and additions. The scope and the schedule are worked out on the call so the work fits around whoever is in the building.
Older homes in Concord frequently have panels that were sized for a lighter load than the home now carries, two-wire circuits without a ground conductor, and wiring that predates GFCI and AFCI requirements. Knob-and-tube wiring and aluminum branch-circuit wiring also turn up in homes from certain eras. An inspection identifies what is there and what it means before any work is planned.
A breaker that trips once and resets without recurring may have responded to a momentary overload rather than a persistent fault. If it continues to hold after reset and the load has not changed, it may be a one-time event. If it trips again under the same conditions, that points to a circuit or load problem that needs a diagnostic visit.
Some work, particularly running new circuits through finished ceilings, requires opening the ceiling surface to access the space above. We use fishing techniques where possible to minimize that, but there are situations where a ceiling has to be cut. We tell you what the job requires before it starts and what the opening will look like.
After any repair or remediation, we test the affected circuits and devices to confirm they are operating correctly. For work that involved the panel, we check breaker function and confirm the load is balanced. We keep you informed from diagnosis to final test so you know what was checked and what the result was.
Someone with legal access to the property and the authority to approve the work needs to be present or reachable during the visit. That can be the property manager, the landlord, or a designated contact who can make decisions if the scope changes. We confirm the contact arrangement when the visit is booked.
Whatever brought you to this page, we handle it. Reach out and we'll get it diagnosed.
Call (980) 479-9789 every day from 6:30 AM to 10:30 PM.
We take the call, scope the job, and confirm the price before anything is scheduled.
Other towns where we take electrical work: Harrisburg, Kannapolis, Enochville. You can browse our map of towns.
Electrical problems come in every size, from a single dead outlet to a full panel that can no longer carry the load. We handle the complete range of residential and commercial electrical work in Concord and across Cabarrus County, and we give you a clear price before anything is scheduled. The table below covers what each service involves, who it fits, and what is practical to know before you call.
| Type of Work | What It Covers | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular |
| Homes with aging or undersized panels, fuse boxes, or panels that cannot carry added loads like EV chargers or updated appliances | Older homes across Cabarrus County frequently carry panels sized for much lighter loads than modern households place on them. A load calculation confirms exactly what the upgrade needs to cover. |
| Wiring for Additions & Remodels |
| Homeowners finishing a basement, adding a room, or remodeling a kitchen or bathroom | Remodel wiring is scoped against the existing panel before work starts. We confirm what the panel can carry and what needs to change before the first circuit is run. |
| Wiring & Circuit Installation |
| Homeowners adding circuits for new loads, remodels, or additions | We run a load calculation before new circuits are added to confirm the panel can carry what is being installed. |
Call us at (980) 479-9789 to get a quote or schedule a service call. We are open daily from 6:30 AM to 10:30 PM, and we will walk you through exactly what the job involves before anything is booked.
(980) 479-9789